STS is an escrow service that protects both buyers and suppliers. Funds are held securely by Made-in-China.com until order terms (e.g., delivery, quality) are fulfilled
| Customization: | Available |
|---|---|
| After-sales Service: | Online Support; Video Technical Support |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
Payment Guarantee
Platform-protected payments with refund support for eligible order issues.
Platform Logistics
Inspection Service
After-Sales & Dispute Handling
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1SUZU HOWO FOTON Refrigerated Semi-Trailers Are Used for Long-Distance Food and Drug Transportation
| Project | Overall technical parameters |
| Vehicle Model | CL9403XLC-F3 |
| Vehicle Use | Mainly used for the refrigerated transportation of food raw materials, beverages, meat, vegetables, medicines, milk products, vaccines and other food materials |
| Vehicle external dimensions (mm) | 14900*2600*3995 no-load height, (excluding cold machine) |
| Inside dimension (mm) | 14700*2460*2500 |
| Effective volume (m³) | 90 |
| Total mass (kg) | 40000 |
| curb weight (kg) | 9500 |
| Rated load mass (kg) | 305000 |
| 1. download configuration | |
| Number of axes | SAF-3 axle air suspension airbag axle 90 traction pin, front axle lift/overall lift |
| Braking system | ABS, disc brake |
| ABS Brand | WABCO |
| Tyre model | 385/65 R22.5 -6 sets +1 spare wheel |
| Rim Type | Aluminum alloy wheel rim |
| Emergency relay valve | With emergency relay valve |
| outrigger system | JOST Double Leg |
| Vehicle toolbox | Through-type carbon steel tool box (stainless steel panel), open with cylinder (can put European tray, size 1200 × 800 × 145mm) |
| Vehicle spare tire and spare tire rack | Including 1 spare tire, cage type spare tire holder |
| Mudguard Configuration | Aluminum alloy half -pack fender (with splash-proof), floor riveted aluminum alloy splash-proof board |
| RESERVOIR CONFIGURATION | Aluminum alloy 2 air reservoir |
| Side protection | Aluminum alloy plate closed, can be turned up |
| Rear protection and rear panel | Appearance reference model photo (photo attached), made of 304 stainless steel |
| Electrical System | Two-wire system, working voltage 24v,1 connection socket, 15 cores, low temperature resistance of the wire harness -40 ºC |
| Light fixtures | LED lamp with E-mark |
| Gas joint and gas pipe | Connector pure copper; gas pipe: red and yellow pipe, low temperature resistance -40 ºC |
| Vehicle wheelbase and front overhang (mm) | Wheelbase 8100+1310+1310, 1200 front suspension (tentative) |
| Undermount frame | Low temperature resistant high-strength plate is adopted, with a thickness of 8mm above and 6mm below and 6mm below. Hot galvanizing process is adopted for the lower frame. |
| Traction pin | JOST BRAND 90# INTERCHANGE |
| Leg | JOST Brand |
| Parking wedge block | 2 pieces, fixed on the lower frame |
| Ladder | Fixed to the tail of the lower frame, telescopic |
| Rear door air hook fixing hook | Fixed on the rear side of the lower frame, spring telescopic rotary type |
| On-board tools | Spare wheel crank, axle nut sleeve, crowbar (if any) |
| 2. compartment configuration | |
| Product Standards | It adopts self-developed lightweight technology, advanced appearance and materials, and thermal insulation performance needs to meet the national A- level standard (GB16949). The technical standards in all fields refer to the leading European trailer brand Smith. Vehicle weight: 9.5 tons, load: about 30.5 tons |
| Cold machine | Vector 1500 |
| Body exterior material | The outer skin is made of pre-painted white aluminum sheet with internal compression |
| Materials in the compartment | Use food grade CFRT skin for the inner skin. |
| Internal insulation material | Internal composite polyurethane foam insulation layer |
| Thickness of side plate (mm) | 60 |
| Top plate thickness (mm) | 100 |
| Floor thickness (mm) | 120 |
| Front plate thickness (mm) | 100 |
| Thickness of back plate (mm) | 76 |
| Scuff plate | Aluminium wear plate approx. 280mm high |
| Side panel air guide device | The inner side plate is provided with submerged vertical guide groove |
| Fixed track | 2 layers/stainless steel, 700mm from the upper plane of the floor to the center of the lower layer, 800mm from the center of the upper layer to the center of the lower layer |
| Floor form | Aluminum alloy corrugated flat floor |
| Overhead Lighting | Four dome lights, switch on the rear right side of the compartment |
| Top ventilation cloth | Yes |
| Bottom cross member | According to Smith similar lightweight technical scheme |
| Floor reinforcement | composite material |
| Backdoor Type | Opposition door |
| Rear door hinge | 4 Hole Aluminum Hinge |
| Number of locking rods | Stainless steel large handle lock rod, 2 for each door, 4 in total |
| Rear door frame | shiny stainless steel |
| Front wall corner column | Bright aluminum alloy with steel frame inside |
| Rear door crash block | There are 1 pieces on the left and right |
| Rear door frame crash block | Multiple Blocks |
| Rear door handle | 1 (soft handle can also be used to design the compartment) |
| Rear Door Outer Scuff Plate | 300mm high stainless steel pattern plate at lower part of rear door |
| Water leak | Two sets of front and rear, with rubber mouth |
| Side door | None |
| Ventilator | 1 front left, 1 rear right |
| Ventilation ribs in the compartment | Front 4 Rear 6 |
| Cold machine decoration | There are, the front wall cooler decoration flip hinge lengthened, the upper flip plate reinforced |
| Surrounding beam of compartment body 4 | Aircraft riveted, not falling off |
| Body Reflective | Stick the reflective logo and configure the rear reflective sign board with E mark. |
| Customer Logo VI | Pending |
| Cold machine bumper | The front bumper under the refrigeration unit must be protected with stainless steel |
| Cold machine oil tank | 250L aluminum alloy material, the rear of the bottom leg of the girder is installed horizontally, the fuel filler is on the left and right sides, with level gauge |
| Other | Refrigerated semi-trailer product customization project configuration refer to Annex 2. |
FAQ
Q1.What about quality ?
Our trucks are brand new truck,the chassis and spare parts come from the original manufacturers,Our trucks have passed ISO, 3C, BV, ASME and other relevant certifications.
Q2.Is there any advantages of your price?
Our company is one of the most important suppliers of Sinotruk, JAC,Shacman,Foton,Dongfeng, JMC,and FAW, which provides guarantees for reasonable price and good quality.
Q3.What about your service ?
(1)we can send our technician to arrive the customer's country to provide the service and also we can train customer's workers for free.
(2)free consultation forever. When you meet small problems, professional advices can help you to solve them soon.
(3)One year free cost warranty.
(4)Spare parts forever. When you need spare parts, we can send them to you immediately.
Q4.If you have no certificate for exporting trucks to our country , what should we do?
There are some regions and countries we can not export completed truck but we can make body according to your requirements and send to you , you install it on your own chassis and sell completed truck .this can help you to save cost and increase competitiveness.
Q5.What is the warranty period for your products?
A:The warranty period of export vehicles is 12 months from the date of production, and some parts are 4 to 10 months.During this
period, if any manufacturing defects occur, we will provide free repair or replacement services. Paid maintenance services shall
be provided outside the guarantee period.
Q6.What is your terms of payment?
A: T/T 30-50% as deposit, and the rest before delivery. We'll show you the photos of the products and packages before you pay the
balance.
Q7.How can i visit there?
Welcome to the factory for inspection. You can fly to Wuhan Tianhe Airport, and our company will arrange a special car to pick you up.
){kind=link}