Clw Brand 4X2 14000L Sprinkler Truck, Stainless Steel Water Tank Truck, Garden Greening Sprinkler Truck, Factory Direct Sales, Reliable Quality Watering Truck
------------------------------------------------------------------------------------------
Watering Truck introduce
1. When the weather is not working in winter, the vehicle is not working continuously, or when the vehicle is not working, all drain ball valves and water pump drain ball valves in the pipeline must be opened to drain the water. If conditions permit, it is best to park the vehicle in a sheltered warm room.
2. During winter operations, fill the vehicle tank with an appropriate amount of hot water until the water pump's discharge ball valve is closed and all ball valves in the pipeline are closed when they discharge water. When the tank is filled with fire hydrant tap water and is far away from the work area, the working ball valve should be slightly opened to ensure that there is a dripping water line.
3. Within 2-3 days of the first operation of the commercial vehicle, the vehicle user must check and tighten the status of the saddle screws on the main beam, the connection screws on the pipeline flange, and the fastening status of the connection plate screws on the main beam (usually the fastening status should be checked at any time). When the attendance rate of vehicle operations is high, the gearbox gear oil of the vehicle should be replaced every 2 months, the water pump drive shaft should be lubricated once, and the water pump should be rechecked for lubricating oil status or replaced every 3 months. The flange screws and gate valve screws of each part of the main pipeline must be checked and tightened regularly or at any time by the vehicle user.
Correct usage of commercial vehicles
1. Conventional watering, start the vehicle and park safely. Open the front or rear sprinkler ball valve (only one function can be selected), close the straight through ball valve (handle perpendicular to the tank), open the gap of the four position three-way ball valve to a position perpendicular to the tank, press the clutch pedal to shift to gear 1, and simultaneously turn on the power take-off switch and music horn. Release the parking handbrake and slowly release the clutch pedal to complete the watering function. The engine speed should not exceed 1800-2000 rpm for a long time, and when the engine water temperature is too high, the throttle should be lowered to reduce the working time or the engine should be pulled over to check the condition of the engine coolant and the tightness of the generator drive belt. When the watering operation is completed or stopped, press the clutch pedal to turn off the power take-off switch and music horn, and shift the gear back to neutral to activate the vehicle safety parking handbrake. Turn off the engine and stop the vehicle.
2. Conventional pumping, start the vehicle and turn on the safety parking handbrake to inject a certain amount of water into the tank. Connect the suction pipe with the four position three-way ball valve interface and submerge the other end of the suction pipe into the water within 40 cm. At the same time, open the gap of the four position three-way ball valve to a position parallel to the tank (in the direction of the cab) and open the straight through ball. Step on the vehicle clutch pedal to open the power take-off switch and slowly release the clutch pedal. Observe the suction status of the suction pipe through the right rearview mirror (in the passenger's position) and gradually increase the engine speed until water is sucked in. Release the accelerator pedal until the engine reaches the maximum speed for pumping. After the pumping operation is completed, press the clutch pedal to turn off the power take-off switch.
3. When the conventional sprinkler pumping effect is poor, please check whether the three-way filter of the water pump is blocked or damaged, and clean or replace it. Maintenance method: Use a 14 fork wrench to loosen the 4 screws on the bottom cover of the filter screen.
Function and Introduction Features
Daily maintenance content
---------------------------------
Water Tanker Truck
| Main technical parameters |
| External dimensions |
8660,7950×2550×3220(mm) |
Cargo compartment size |
xdmm) |
| In terms of overall qualty |
162000Kg) |
Load capacity utilization c |
oefficient: |
| Curb weight: |
6450(Kg) |
Rated load capacity: |
9555,9620(Kg) |
| Rated passenger capacity |
(Porron) |
Anti lock braking system |
|
| ARBTsoch anglo/deparure |
13/10 |
E nsion/ear |
1450/2550(mm) |
| Fuel type |
diesel cil |
Emission standards |
NationalV |
| Axle kad |
5600/10600 |
wheelbase |
3950(mm) |
| Number ofares |
two |
Maximum speed |
89(km/h) |
| Number of tires |
6(pisces) |
Tire specfications |
9.00R2016PR |
| oil consumption |
(L/100Km) |
Number of spring plates |
8/10+8,8/11+8 |
| Front wheelbase |
1810,1820(mm) |
Rear wheelbase |
1810,1810(mm) |
| Turning form: |
Steering wheel |
|
|
Sprinkler truck, also known as sprinkler truck, multifunctional sprinkler truck, landscaping sprinkler truck, water tank truck, or water transport truck. Sprinkler trucks are suitable for various road surface cleaning, tree, green belt, lawn greening, road, factory and mining enterprise construction, and high-altitude building cleaning. It has functions such as watering, dust suppression, high and low level spraying, pesticide spraying, guardrail flushing, as well as water transportation, drainage, emergency firefighting, etc. Spray truck, also known as multifunctional green sprinkler truck. Used for cleaning road surfaces, sanitation, dust prevention, watering, pesticide spraying, etc. in urban roads, large factory areas, military units, gardens and other units to achieve the effect of beautifying the environment.
The role and significance of sanitation sprinkler trucks
1. Definition and function of sanitation sprinkler truck: Briefly describe that sanitation sprinkler truck is mainly used for urban sanitation and cleaning work, reducing dust flying, cleaning roads and public places by spraying water mist.
2. Purifying air quality: Introducing the spraying operation of sprinkler trucks on urban roads and construction sites can effectively reduce the concentration of pollutants in the air and improve the environmental air quality.
3. Enhance the city's image: It is pointed out that the use of sanitation sprinklers can keep the city's roads clean and refreshing, provide a good living environment for citizens, and enhance the city's image.
Performance characteristics of sanitation sprinkler trucks
1. Large capacity water tank: Describe the design of the large capacity water tank for sprinkler trucks, providing sufficient water source and long-lasting operation time, reducing the frequency of repeated water refilling.
2. Precision spraying system: introduce the advanced spraying system, which can adjust the spraying angle and spraying range to ensure uniform and efficient spray.
3. Automatic control system: Clarify the importance of automatic control system, which can achieve intelligent operation and improve operational efficiency.
4. Multi functional sprinkler truck: Explore how modern sprinkler trucks have multiple functions, such as road condition monitoring, environmental monitoring, and road cleaning.
Application areas of sanitation sprinkler trucks
1. Urban sanitation: Detailed introduction to the application of sanitation sprinklers in urban street cleaning, garbage removal, and park management.
2. Road construction: Point out the role of sprinkler trucks in the road construction process, which can reduce construction dust and clean the road.
3. Scenic area management: Explain the use of sprinkler trucks in scenic area management, such as cleaning squares and lawns, and providing a green and refreshing environment.
4. Cleaning of mines and construction sites: Describe the use of sprinkler trucks in mines, construction sites, and other places to effectively suppress dust emissions.
Market prospects of sanitation sprinkler trucks
1. National policy support: It is pointed out that environmental protection policies have a promoting effect on the market of sanitation water trucks, and the industry has broad prospects.
2. Accelerated urbanization process: The expansion of urban construction scale has increased the demand for sanitation sprinklers, and the market potential is enormous.
3. Technological innovation: Emphasize that the sprinkler truck industry is constantly innovating technology, improving product performance, and meeting market demand.
4. Maintenance and repair market: Explore the maintenance and repair market for sprinkler trucks, and explain its importance in the development of the sprinkler truck market.
Scene diagram of sprinkler truck operation
Conclusion: By comprehensively analyzing the performance characteristics, uses, and market prospects of sanitation sprinklers, we aim to help users understand the importance and value of sprinklers, while providing them with comprehensive information. Remember, if you are interested in environmental protection, urbanization processes, and the clean industry, sprinkler trucks will be a huge potential investment area.
Our Competitive Advantages
- Factory & Trading Integration - We are both a manufacturer and a trading company, ensuring direct factory pricing while providing professional export services.
- High-Quality Products - With in-house production, we maintain strict quality control at every stage, from raw materials to final assembly, ensuring reliable and durable products.
- Competitive Pricing - By eliminating middlemen, we offer cost-effective solutions without compromising on quality.
- Customization & Flexibility - We provide tailor-made solutions, including customized designs, optional components, and branding services, to meet diverse market demands.
- Efficient Logistics & After-Sales Support - With years of export experience, we ensure timely delivery, hassle-free shipping, and dedicated after-sales service for our global customers.
Q1.What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q2. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q3. How about your delivery time?
A: Generally, it will take 20 to 30 days after receiving your advance payment.
Q4.What is the warranty?
A:You can always enjoy technical support by phone or email. We will provide timely solutions.
Q5. How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
A:2. We respect every customer as our friend and we sincerely do business and make friends with them,no matter where they come from.
After-sales service
Under the condition that the user strictly follows the instruction manual and operates normally, within one year from the date of purchase of the car (subject to the vehicle factory registration card), the driving mileage is not more than 25,000 kilometers, and the product parts damaged due to design, manufacturing and assembly reasons are identified by the relevant automobile service station and supervision department. Within three working days to our company's after-sales service department to submit written information, after-sales service department confirmed after the implementation of three guarantees of service.
Specific services are as follows:
1, the three guarantee service period of product quality to repair, repair costs are free (excluding wearing parts and electrical parts).
2, lifetime warranty. For products that exceed the warranty period, only relevant cost fees will be charged for replacement parts.
3, free operator training:
(1) On-site guidance by engineers arranged by our factory, learning theory and practical operation;
(2) Master the basic theory, performance and function of special vehicles;
(3) According to the program can skillfully operate;
(4) Can carry out normal daily maintenance and eliminate general technical faults.
Audited Supplier 
){kind=link}