compression garbage truck
Performance and characteristics of compressed garbage trucks
1. The box body adopts a sturdy frame structure welded with reinforced beams and high-strength steel plates, and is made of high-quality steel from Wugang
Made of Q345 special steel, with three sides and three bottoms, curved box body, good stress resistance, no deformation, and three sections of push plate oil cylinder
The loading capacity is larger, and there is a large capacity sewage tank on the side of the box.
2. The welding seam of the box adopts robot automated welding technology, which does not scratch or leak, and the appearance of the box is beautiful
Observation, strong pressure resistance, no deformation.
3. The key components of the electrical and hydraulic system adopt well-known brands: Jiangsu Zhongmei/Weisenbole multi way valve assembly,
Anhui Wanye/Changyuan hydraulic oil pump, Siemens PLC control system (optional CAN) (two control boxes in total) with
Remote control, Hubei Boli hydraulic cylinder. All seals of the oil cylinder are made of HALLITE brand imported from the UK,
Ensure the service life of the oil cylinder. In the hydraulic system of the lifting filler, a bidirectional balancing valve is installed. This valve is not
Only ensuring the smooth descent of the filling device, while blocking the direct connection between the lifting cylinder and the hydraulic hose, even if
When the oil pipe bursts, the filler will not suddenly fall down, which improves the safety of use.
4. The tail feeding flipping mechanism is widened and thickened, and the flipping mechanism shaft sleeve adopts quenching processing technology for flipping
The arm main pin adopts a through double-sided welding process, which is sturdy and durable, and will not break.
5. The filling device assembly is mainly composed of filling device housing, sliding plate, scraper and other components. The filling device slide track
Using high-strength wear-resistant materials for cold bending, the skateboard is equipped with integral nylon sliders on both sides, which have self-lubricating properties,
Easy maintenance, high stability, and better wear resistance; The force bearing part of the scraper adopts local reinforcement treatment, and the structure
Secure. The lower curved plate is made of high-strength and wear-resistant materials, and there is a water leakage port machined on the curved plate, which is convenient
The sewage inside the filling device flows into the lower sewage storage tank to avoid sewage leakage during transportation
A large capacity sewage storage tank is installed, with large-diameter galvanized wastewater discharge outlets on both sides of the tank.
6. Convenient operation control, the job control box is installed in the driver's cab and on the right and left sides of the rear of the vehicle
Equipped with an emergency stop button and remote control, the operation control box in the cab can control the pushing, unloading, and selection of materials
Choose the operating mode (such as automatic or manual), and the job control box at the rear of the vehicle controls the filling mechanism and bucket flipping mechanism
The homework is very convenient to use and operate. Especially in landfills, operators do not need to get off the vehicle
Complete unloading and sewage discharge.
7. Automatic and manual operating systems, each mechanism has three types of operation: automatic, manual, and remote control
If there is a malfunction in the automatic operation, manual operation can be used to complete the mechanism operation and unload the garbage, ensuring both
The efficient operation of garbage trucks provides great convenience for debugging, maintenance, and troubleshooting.
8. Double sewage collection tank design, sealed treatment, eliminating secondary pollution, with unique installation on the sewage tank
The drain valve is reliably sealed and not easily clogged.
9. All vehicles are equipped with operation instruction labels for daily maintenance and upkeep, making it convenient and efficient.
| Main Technical Parameters |
|
| Overall Dimensions: |
5830, 5995, 5735×2050×2450(mm) |
| Cargo Compartment Dimensions: |
××(mm) |
| Total Mass: |
4495(Kg) |
| Payload Utilization Factor: |
|
| Kerb Mass: |
4050(Kg) |
| Rated Payload: |
315(Kg) |
| Trailer Mass: |
(Kg) |
| Semi - Trailer Saddle: |
|
| Cab: |
|
| Front - Row Passengers: |
2(persons) |
| Rated Passengers: |
(persons) |
| Anti - lock Braking System: |
Yes |
| Approach/Departure Angle: |
20/10(°) |
| Front Overhang/Rear Overhang: |
1130/1850, 1130/1715, 1115/1820(mm) |
| Axle Load: |
1617/2878 |
| Wheelbase: |
2850, 2800(mm) |
| Number of Axles: |
2 |
| Maximum Speed: |
105, 110(km/h) |
| Fuel Consumption: |
11.4, 11.12, 11.17, 10.85(L/100Km) |
| Number of Spring Leaves: |
7/7 + 5, 7/4 + 3, 7/5 + 2, 3/5 + 2, 2/3 + 2, 3/3 + 3 |
| Number of Tires: |
6(pieces) |
| Tire Specification: |
6.50R16LT 10PR, 195/75R16 10PR |
| Front Track: |
1495, 1415, 1510(mm) |
| Rear Track: |
1435, 1455(mm) |
| Before Braking: |
|
| After Braking: |
|
| Before Control: |
|
| After Control: |
|
| Steering Type: |
Steering Wheel |
| Starting Method: |
|
| Vin Vehicle Identification Number: |
LVBV3JBB×××××××× |
FAQ
Q1. Is your company a factory or trading company?
A: We are a leading manufacturer of special trucks in China. Welcome to visit us in Suizhou city.
Q2. What is your terms of payment?
A: T/T 30-50% as deposit, and the rest before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DAF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 20 to 30 days after receiving your advance payment.
Q5. Can you customize the product according to my requirements?
A: Yes. Every product can be customized,according to you demand.
Q6. What is the price of your product?
A: We are direct sales from the factory, so the price is very competitive and cost-effective
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q8: What service can I get from you?
A: We provide lifelong tracking service. Meanwhile we provide free training and technical support to guide you repair your product.
After-sales service
Under the condition that the user strictly follows the instruction manual and operates normally, within one year from the date of purchase of the car (subject to the vehicle factory registration card), the driving mileage is not more than 25,000 kilometers, and the product parts damaged due to design, manufacturing and assembly reasons are identified by the relevant automobile service station and supervision department. Within three working days to our company's after-sales service department to submit written information, after-sales service department confirmed after the implementation of three guarantees of service.
Specific services are as follows:
1, the three guarantee service period of product quality to repair, repair costs are free (excluding wearing parts and electrical parts).
2, lifetime warranty. For products that exceed the warranty period, only relevant cost fees will be charged for replacement parts.
3, free operator training:
(1) On-site guidance by engineers arranged by our factory, learning theory and practical operation;
(2) Master the basic theory, performance and function of special vehicles;
(3) According to the program can skillfully operate;
(4) Can carry out normal daily maintenance and eliminate general technical faults.
